High Performance Solar Powered LED Street Lights Solar Panel 160W / 24V 4200k

High cost performance Solar Powered Led Street Lights of Safe and reliable

led for solar street light

Name Specification Quantity Parameter
Solar panel 160W/24V 1 piece

Polycrystalline solar cell, 156x156mm, 72 piece.


Vm: 36.145V,Im: 7.775A,Voc: 44.949V, Isc: 8.218A


Size:1956x992x50mm with 90cm wires,MC4 Connector.




Warranty: More than 90% output power in 10 years .and more than 80% output power in 25 years.


The product have passed TUV, IEC, MCS etc certificate.


Light source




1 piece

Single Integrated Power LED(80W),Woking Voltage DC24V,


General luminous:8000lm,LED Luminous Efficiency:100lm/W,


Center illuminance:25lx,Ra>80,Color temperature:2700-7000K,Protection Grade :IP65,Working life ≥ 50000hours.


Lamp shade is Die-casting aluminum,and its face is UV-resistant and corrosion resistant .


No bad glare; No Strobe; Start without delay .Low maintenance cost .


Production Size :720x320x172mm ,Weight :9.56KG

Packing Size:775x345x258mm,Weight :12.2KG

Controller 20A 1 piece PHOCOS CIS Series,12V/24VAutomatic identification , light control and time control, Protection Grade IP68, waterproof
Battery 12V/160AH 2 piece

Gel Battery; small self -discharge rate,the better deep discharge, Top charge acceptance, large capacity,strong start in low ,the good shock resistant and Anti-temperature charge Production

Size: 483x170x240mm,Weight :44.5KG

Packing Size :506x193x290mm,Weight :46.4KG
The two Battery is used in series in this collocation

Pole and other steel fitting 8M Set Best steel Q235 or Q345;hot dip galvanized and powder coated .
iron plate is rolled into type for one time .
Flange plate :400x400x20mm
Battery body are welded after 2mm plate stamping molding
Lamp arm is Welded with tube and iron plate.
Wires harness -- 1 piece

With the special connector ,standardization,substitutability ,high installing efficiency,saving cost .

Wire harness can be designed according to different lamp type .

others Baseplate 20 steel rod ,standard component and so on
Conditions Voltage of system: 24V,working time: 10 hours/day, Working temperature:-20 °C -- +50 °C
Packing Quantity 65set/40HQ

  High Performance Solar Powered LED Street Lights Solar Panel 160W / 24V 4200k





System operation:

1.The solar led street light system converts the sun energy into electricity and stores it to provide green illumination.

2.Luminaries utilize High Power white LED with superior thermal management design.

These extremely durable fixtures are waterproof and designed for multiple applications including indoor and outdoor.

3.Luminaries are supplied fully assembled & ready for either retrofit or new installations.








System composition

◆ Solar street light system is composed by the solar cell components (including stent), lamps and lanterns of LED lamp, solar controller, battery (including battery insulation box) and light pole and so on several parts.

◆ Solar cell components are made of polysilicon solar cells. LED lights are used for high-power LED lighting.

◆ Controller in light pole, relating to, the control, overcharge, discharge protection and reverse connect protection, have adjust the lighting time, half power, intelligent charge and discharge functions, etc.

◆ The battery is placed in an underground storage tank, which is used in a plastic storage battery.

◆ The solar lamps are fully automatic and do not need to be excavated, but the lampposts need to be installed on the embedded parts (concrete base).

   High Performance Solar Powered LED Street Lights Solar Panel 160W / 24V 4200k


Solar Powered LED Street Lights

company profile
Jiangsu jiang xu lighting technology co.,ltd
Verified Suppliers
Trust Seal Verified Suplier
All Products
About Us
Contact Us
Request A Quote
Change Language